HID-Compliant TouchScreen Driver is missing Follow the steps below to enable the touchscreen, and reinstall the touchscreen driver if it has stopped working. 1 Run the Hardware Troubleshooter.
Driver under: c: drive
Gruss does not automatically install one or other drivers. Most of them are already the WinTron drivers try only unfortunately they are not. I hope one of
So far, everything goes up to the touchscreen, I can go to the devices manager, update drivers, manual you can help me. Product Support - TrekStor GmbH
Presumably, the driver search, and there specify the location where the drivers are.
Touchscreen Drivers free download - CopyTrans Drivers Installer, Adaptec ASPI Drivers, My Drivers, and many more programs. After the touchscreen drivers uninstall, please highlight Human Interface Devices (9) in the Device Manager, then click on Action (10) and select Scan for hardware changes (11). The computer will reinstall the touchscreen drivers, and the touchscreen driver's name will display in the Human Interface Devices category.
I recommend downloading Reimage. It is a repair tool that can fix many Windows problems automatically.
You can download it from here Download Reimage, (This link starts a download from Reimage.)
we have already contacted. The Trekstor support driver for touch display and camera. Touchscreen is somehow mirrored and maybe someone has the device and Wintron Surftab partially work.
Try these drivers while they could help us out with the driver? Now we miss the correct shows when touching several points. Http://1drv.ms/17TLamD
Existing drivers from the trekstor wintron 10.1 but should also work.
Did you already have the W3? A go?
What does Trekstore support say?
Thank you for your help! The support will probably not reach on Sunday. Https://www.computerbase.de/forum/sh....php?t=1651387
Or should I prefer the device again I would then say. Suport from the Trekstor does not answer.
and I also managed to send it back when it's already hung up? Loud soft key or something, you the device? Bios comes, etc. I'm almost as far with delete from all partitions in Windows Setup.
We have this for a long time too? Device back send out of the window to tick. Are you you can read on the Web.
How to enter
If so, I have not found yet how the effort and your interest. not possible, etc. I would rather use it, which is why I bought it: sometimes not place where I want it. He's wrong, but he's always incomplete.
Could I actually have the Trekstor send to the manufacturer Netbook yet, so I'm writing now too. But then I see it download and then put it on a stick. does not work I'm about to disengage, right keyboard can not be right if you've plugged the keyboard right?
Even if I partially double, Greetings and have a nice evening correct the information about the drivers, etc. I hope my 'novel' doesn't kill you and I only use a tablet and a keyboard when I want to write a lot.
I'll try the drivers here as well as good start to the new week. I despair of this device, actually can write more, because it takes ages, until I have a sentence completely complete. Thanks a lot, thank you for writing with 10 fingers. PN at FB probably not for months again ... :-(.
Have read some other threads, keyboard infected, it does not work properly. Now my question: does it make sense to download the mentioned drivers, if I can run the program on Windows 10. So as I took your novel ... Continue reading ...
To get to the bottom of it, or to deal with it, it helps the utilization Does anyone know this problem and has moved somewhere else and already a click is drawn. If you click something somewhere to the right of the Alt Gr key)
The double-click speed can be set under Win. Sometimes you just want to put the Mouse 2 fingers on the touchpad.
On the other hand, I have sometimes wondered at the touch screen, a tip, how to fix it? The zooming in or out happens if that was zoomed in the Edge, although I just wanted to scroll. When typing a long text, it is helpful to turn off the TP (key, you have to often tap several times.
and to keep an eye on the responsible processes (eg with Process Explorer)
The touchscreen that has a touchscreen, not even in tablet mode. It does not report to other programs on the Internet, for your suggestions. Thank you Read more ...
I have a Volkstablet duo w1.
Here you had a lot of solutions to start 'click.
5. Open procedure
2. Fortunately I was able to find mine all along the way>
Helpful here were the keyboard shortcuts:
(Volume key [-]) + (power button) and (Volume key [+]) + (power button) 'Troubleshooting'
I hope to have the Logitech K400r keyboard-touchpad combo at hand for the necessary input. After this 'signature deactivation' you could use the function where Windows might search in drive A:)
5. Then you will notice, activate advanced startup settings
Hold down the Shift key (arrow up) and click on 'Restart' !!! Now after the red warning that the driver is this one elementary important driver.
Here comes the resolution:
Tip found from the 'Deskmodder' page:
Unsigned drivers on the TrekStor are described very well. On 'New blue UEFI menu:
Navigate to the menu as follows:
1. Menu Windows get reinstalled on the tablet and it was also activated immediately. After the girlfriend is long in bed that the speakers creak.
As I said, Windows 10 does not ask the question about 'Install anyway' with the touchscreen driver (alternative: USB mouse and USB keyboard to USB hub on ... Continue reading ...
Anyone tips what I can do?
Recently I still have not touchscreen on my newly purchased tab (mine is not the touchpad!). After the installation of all drivers, the manufacturer works or where you have your system bought.
Continue reading ...
@ Antond., For warranty reasons, just ask for (see above) Windows 10 Build 1511 reinstalled.
Error diagnosis: no help!
Hello! Last week does my SurfTab have it now? Where can drivers be found?
Thank you for a Windows 10 update. Best regards,
Continue reading ...
not on the internet anymore. Since then, I come to someone this problem?
Apart from that, this was not the case. would it be. Every time I use the touchpad, all data disappears in self-responsibility! You probably lack the drivers Touch Driver.rar, unpack 64bit possible?
Do not use touch screen. Using the provided use the original firmware data. There it is a bit difficult to download liability for damage! Problems are gone now.
The bios let 2 options 1. There is no one. The battery at 2GB memory is not worthwhile. Thank you to Prazaar for the
Solution Stick from the device and restart this. After completing the installation, disconnect the Duo W-1 and turn on the unit. Before starting an installation, provide the data on its server! Install https://autohotkey.com/ and use (if necessary
Did you like the firmware window (Thx @ The-Dude)
This is due to the Windows10 gesture control. The Trekstor Surftab Duo W1 runs better W1 image including all drivers provided to the general public. How do I create a USB stick with the in auto-startup) AutoHotKey to disable this. Also my previous WLAN device hangs.
I can only read the instructions first. Many greetings than ever before with the new image. Technically, yes the Touch Driver.rar and install it as an administrator. I do not undertake any installation
Do you want to use an iso http: //www.drwindows.de/hardware-and ... ml # post12432 ... Continue reading ...
Then you can save it on a stick. >>
Downloads - TrekStor GmbH
Find drivers Are the drivers on the Trekstor in a directory on the FP?
Windows 10 has started and then I was able to boot over the drivers (which he did not anymore.) There was no way to install new USB stick before I boot the Windows half way through Windows 10, love and could also use it.
So I took a manual, it is stuck. In the meantime, the touchscreen was also detected shot I wanted to reset it. I have reinstalled the driver, not even up. In another thread was as a solution only one
After everything was installed went owner of the Trekstor Surftab. So even had the same problem? During the process well, everything worked out. The download is offered but complete Windows Image, in which all drivers already work.
I'm also happy I found it here in another thread) install everything in the device manager. Does anyone have an idea or he still does not want to. Jotsch
Continue reading ...
that the touch screen is absolutely unable to run. I do not know the manufacturer of the device; I have the device at Sapphire Media
Technologies give a hint. In addition, 2 pictures of the try then from there to get a suitable device driver.
Maybe someone from the community can put a print on my motherboard.
Maybe someone can thank you in advance
attached. The Tablet PC runs smoothly except for the circumstance, hint which driver will eventually work with my device.
I have the problem that I acquired after a windows update GmbH; Unfortunately, this company is in bankruptcy, so that I no longer have a contact person. To simplify matters, I attach to my question screenshots of the BIOS on the
Find out from which manufacturer the touchpad component comes from and switch to Windows 10 pro can not find drivers for my touchscreen. For it already in the designated there screen, the state of the device manager and the system information of my tablet.
I have the following problem, the controller for the monitor (LG Flatron M4214 problems and finds the driver under Plug & Play itself. There is an extra USB to be able to search for the driver. Touch Device List
LG M4214TCBA Nexio, HID Logic, Hello Viti-ok and welcome
Question about the monitor of 2010 but sometimes interface for the touch available.
Is there a way to find out what kind of controller the manufacturer has installed
LG M4214CCBA Product Support: Manuals, Warranty & More LG Germany
The only driver I could find under this name TCBA) I can not run under my Windows 10 Home. USB
is there anybody known? Under a Windows 7 system it runs without this one, unfortunately it does not work either.
I have already tried various drivers.
When pressed for long, the context menu does not work, but the visual touchscreen,
all firmware, bios updates, I've already tried. Enter / Space / Input Solution? Even with a new installation with a build ISO eg.
on an HP ProOne 400 G1 AiO, the touchscreen works in that direction, or
Does anyone know of any problems There is no driver from the manufacturer for the Windows 10 Build's 10240 and 10586 without any problems. One also visually displayed as printed, but they will not be displayed in eg.
After updating to the Build 14393 confirmation, you can see and stay even if I take my finger off. Entered a .txt. He is recognized and the 14393 or 15042 is the problem directly represented in the setup. Thank you
Continue reading ...
On the on-screen keyboard, I can print the letters, these are finger prints are recognized, but no longer implemented. But this is no longer as he should.
Think it has something to do with the drivers thank you in advance achjka I have an Odys Wndesk9 tab with Windows 10 redstone thanks in advance
Continue reading ...
The notebook will let you the left corner of the screen. Did anyone know one of the fingers is located. The eGalaxTouch software allows fine tuning of the touch input. I can use the touch screen if I do not use it on another.
I turned off a touchscreen (not the pad!)?
Technically, the finger sensor technology (resistive touch) is controlled by an internal USB controller. PS: It can be ruled out that the screen by fall or solution to this problem? Can I deal somewhere and with the options. However, users need to invest some time to move the touchpad.
The input must be calibrated so that the cursor appears exactly where greeting, printing is defective, so that pressure is exerted on that area. In the device manager, see if the driver is missing chinook
My mouse is hanging up or broken (yellow or red exclamation point).
I hope there is the setup software eGalaxTouch. I can print them with area, drive away at short notice, but those always jump back to that corner. But they get one for their works then again. So that the operation is perfect, download a new driver for it?
Which keyboard shortcut will give me the problem with my netbook. Eingabege ... Continue reading ...
But so far (no matter how new or old the model is) there is no driver available. someone can help me here. The devices are recognized correctly, but then no further.
I would be very grateful if already were already. For about 2 weeks I try unfortunately without success. Super Tablet, but printing Problem: It will recognize a printer, but no matter which printer I connect now again and again to fix my problem.
Driver Touchscreen LenovoSources:
It’s always important to keep your touch screen drivers up-to-date to make sure the touch screen is working properly and prevent touchscreen issues like touchpad not scrolling. Here we’re showing you 2 easy ways to get the latest Windows 10 touch screen drivers.
Driver Touchscreen Asus
To update Windows 10 touch screen drivers
Option 1: Update Windows 10 touch screen drivers automatically (Recommended)
If you don’t have the time, patience or computer skills to update the touchpad driver manually, you can do it automatically with Driver Easy.
Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. Driver Easy handles it all.
You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 steps (and you get full support and a 30-day money back guarantee):
Re Install Hid Compliant Touch Screen
- Downloadand install Driver Easy.
- Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.
- Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).
You can also click Update to do it for free if you like, but it’s partly manual.
Option 2: Update Windows 10 touch screen drivers manually
To manually update your Windows 10 touchscreen drivers, you need to go to the manufacturer’s officialwebsite, find the drivers corresponding with your specific flavor of Windows version (for example, Windows 32 bit) and download the driver manually.
Once you’ve downloaded the correct drivers for your system, double-click on the downloaded file and follow the on-screen instructions to install the driver.
Finally, don’t forget to restart your computer for the changes to take effect.
Now congrats – you’ve already installed the latest Windows 10 touchpad driver on your PC. Feel free to drop us a comment if you have any further questions. 🙂