Download Tektronix Driver


Tektronix USB instruments use and require a generic USB Device Driver, referred to as a USB Test & Measurement Class driver or USBTMC driver. USBTMC is a subclass of the USB specification. This driver is typically included with the Virtual Instrument Software Architecture (VISA). (See block diagram below.). We don't have any change log information yet for version 2.82 of Realtek HD Audio Drivers x64. Sometimes publishers take a little while to make this information available, so please check back in a few days to see if it has been updated.

The Instrument Control Toolbox supports communication with instruments using instrument drivers or through SCPI commands over supported interfaces such as GPIB, TCP/IP, Serial or VISA.

This links to an IVI instrument driver for use with v2.0 of the Instrument Control Toolbox™ and higher. This driver is for use with Tektronix MSO/DPO2000, 3000, 4000 and MDO4000 series oscilloscopes.

For additional information on working with IVI instrument drivers or SCPI commands, visit or

Download Tektronix Driver Test

For general information about the Instrument Control Toolbox, visit

Download Tektronix Driver



Instrument Type


Download Tektronix Drivers


Download Tektronix DriverDriver

Models Supported

dpo4054, dpo4034, dpo4032, dpo4104, mso4032, mso4034, mso4054, mso4104, dpo3012, dpo3014, dpo3032, dpo3034, dpo3052, dpo3054, dpo2012, dpo2014, dpo2024, mso2012, mso2014, mso2024, mso3012, mso3014, mso3032, mso3034, mso3054, dpo2002, mso2002, mso4034b, mso4054b, mso4104b, dpo4034b, dpo4054b, dpo4104b, mdo4054-3, mdo4054-6, mdo4104-3, mdo4104-6, dpo4102b, dpo4102b-l, dpo4104b-l, mso4102b, mso4102b-l, mso4104b-l, dpo2002b, dpo2004b, dpo2012b, dpo2014b, dpo2022b, dpo2024b, mso2002b, mso2004b, mso2012b, mso2014b, mso2022b, mso2024b, mso4014b, dpo4014b

Driver Type